In Mega ST

In 1040 ST with wirelless dongle

Very small converter USB to ATARI. Fit in Mega ST Keyboard and 520,1040. Works on 260,520,1040, Mega, ST, STF, STFM,STE, TT & Falcon, Posibility to update via USB connector, box included*.

The price is 20 Euro + Shipping.

The price for USB Cable A to A 1M is 1 Euro + Shipping.

Out of stock

Design Draw

Schematic

How To Change/update Firmware

Personaly tested with this list of mouse:

Logitech RX250 (Wired)
Logitech M100 (Wired)
Logitech B100 (Wired)
Logitech M105 (Wired)
Logitech M187 (Wireless)
Logitech M185 (Wireless)

*Colors may differ from photo (Blue, White or Black)

 The test kit for ATARI ST, STE, Mega ST, Mega STE, and TT for check hardware, with 4 LEDs and slide swtich for selection. Box included.

0 = ST and Mega ST
1 = STE
2 = Mega STE
3 = TT
 

The price is 10 Euro + Shipping.

In stock.

 This board (1)  is used by the Test Kit*. You can test Joystick & Mouse (6), Printer (5), DMA(7), Serial**(2 & 3) and MIDI port (4). For 520, 1040, Mega, STE, TT. All wire and case* is included.

Design Draw 

Price is 40 Euro + Shipping

On request.

* Test kit sold separately.
**TT only Serial Port A

*Colors may differ from photo (Blue, White or Black)

Well known cartridge, can keep the time* on the 260, 520 and 1040 without losing the cartridge port, case* included

Schematic

Price is 12 Euro + Shipping

In Stock.

Software

Manual

* Use 118 value for 2018 (Max 2059).

*Colors may differ from photo (Blue, White or Black)

With this small hardware you can switch resolution of ST High -  Low/Medium and connect to VGA monitor. With jack connector you can connect speaker (Mono) and video signal output. You can change volume using the up/down push button, the level (64 steps) is automatically stored. The led for High Resolution and other for Medium and Low. Case* included.

WARRING: THE COLOR MODE WORKS ONLY WITH VGA MONITOR SUPPORT THE 15KHZ.

For ST, STE, MegaST and MegaSTE

The price is 23 euro* + Shipping

In Stock.

Schematic

Link to ATARI Forum 

With this small hardware you can connect VGA Monitor in ST hight resolution. The ouput jack 3,5mm connector for audio (Mono). Case* included.

For 520,1040, Mega ST, Mega STE.

The price is 5 euro + Shipping

In Stock.

*Colors may differ from photo (Grey, Blue, White or Black)

New PCB version of Junior Prommer:

1) 28 and 32 ZIF Socket with switch & Led indicator
2) Power by standard USB Cable (not included)
3) All Integrate circuit on Socket for easy repair
4) All components through hole for easy repair
5) Activity and Power LED
6) Easy access to setting 
7) Box included

The price is 27 Euro + Shipping.

In Stock.

Software Download French V 2.4 (26/02/1990)
Software Download Deutch V 2.33 (8/12/1989)
Software Download PinaTubo Deutch V 2.4 (12/09/2001)
Software Download PinaTubo English V 2.4 (12/09/2001)
Supported Device by Junior Prommer V2.4 & 2.33
Supported Device by PinaTubo V 2.4

Junior Prommer V2.4 & 2.33 ST Medium, ST High, TT Medium

This assembly is made for the 520 and 1040STFx with the 68000 under the keyboard, it includes a compactFlash connector, the TOS 2.06 (US / UK / GE / FR chosen by the DIP switch) and a clock (like Forget Me Clock). There is a can of soldering work, soldered the DIP 64 socket (included) on the 68000, soldered 3 wires for the power supply and 2 other wires for the signals ROM2 and INT, and the last ROM 3 for the clock on ( All wires are included). Note: TOS circuits are reprogrammable Flash.

For TOS 2.06 languages, I replace a language with Spanish, Swedish, for other languages please provide me with the file.

Please note that it is no longer possible to close the ST cover and place the keyboard correctly. I am working on a solution to lift the hood and be able to close it properly.

Price is 35 Euro + Shipping

In Stock

IDC Software & RTC setup.

Schematic.

This assembly is made for MEGA STE, convert DMA to SCSI. (Copy of original ATARI board, all IC on socket). Added Parity mode (not tested). Maximum disk size 1GB. Compatibility with HDUTIL &  IDC.

Price is 35 Euro + Shipping

In Stock

Very nice project for easy transfert on STE and Falcon using the extended Joystick port.

The software: http://onorisoft.free.fr/atari/sdextjoy_C.zip
Informations: https://www.atari-forum.com/viewtopic.php?f=15&t=39022&p=402256#p402256

Price for microSD version: 6 Euro.

In stock.

Price for SD version: 7 euro.

In stock.

Schematic microSD

Schematic SD

Support the author made a donation: https://www.paypal.me/orionsoft42

 With this board you can analyze TTL (5V) signal. Start capture with Trigger and you can synchronize by external clock. (You needed connect external 5V power supply by microUSB). Case* included.

Design Draw
Schematic

Price 22 Euro + shipping.

In Stock.

Software

Do not connect hard disk on ASCI (DMA) port in same time.
Not tested on Mega STE & TT.

*Colors may differ from photo (Blue, White or Black)

Eiffel 3 ATARI for 1040 ST, STE, Mega ST, STE, TT

Eiffel is board for connect keyboard and mouse in PS2. If your mouse use USB connector with adapter PS2 you can connect directly the USB (without green adapter). You can use this interface in external or external. For 1040 STx, Mega STx, TT.

Firmeware 1.1i programmed.

Web site of auhor

Assembled & tested version with minimum components and flat cable. You can connect PS2 Mouse, keyboard and joystick 0 and 1. (Posibility to add LCD, FAN and Temperature sensor).

Price is 13 euro + shipping

In Stock.

The basic version include PS2 Mouse and Keyboard port, and leds activity, and small RJ12 6P/6P wire and case*.

Price is 9 euro + shipping

In Stock.

*Colors may differ from photo (Blue, White or Black)

The light version include PS2 Mouse and Keyboard port, Joystick 1 port and leds activity, and small RJ12 6P/6P wire and case*.

Price is 13 euro + shipping

In Stock. 

 *Colors may differ from photo (Blue, White or Black)

 Assembled & tested version with minimum components and flat cable for using with Mega & TT series. You can connect PS2 Mouse, keyboard and joystick 0 and 1. Case* included.

Schematic

Design Draw

Software

File for print case

Price is 18 euro + shipping

In Stock.

*Colors may differ from photo (Blue, White or Black)

LCD White Black

LCD White Blue

 Assembled & tested version with LCD and flat cable for using with Mega & TT series. You can connect PS2 Mouse, keyboard and joystick 0 and 1. For creating case you can use the design draw for cotations. (Choise your color LCD). Case included.

Schematic

Design Draw

Software

File for print case

Price is 30 euro + shipping

On request only.

Simple adatper for TOS 1.4 (1.04) in 2 ROM. Just need to change jumper in ST (256K -> 1M). 2 PCB assembled with ROM included. Language available: US, UK, DE, FR,NL,ES,SE (tell me which one you want).

For:
520STF REV B
1040 STFx Board REV 2A
1040 STFx Board REV 1.1
1040 STFx Board REV F
1040 STFx Board REV F 2
1040 STFx Board REV 1
1040 STFx Borad REV D
All STFx with Rom verticaly left and jumper size (256K/1M).

In Stock.

Price is 10 Euro + Shipping

Simple hardware simulate mouse or joystick, connect on Mouse or Joystick port and test with this software from P. Putnik.

Other sofware write in GFA and compiled write by me (source included).

For 520, 1040, Mega, TT & Falcon

Price is 4 Euro + Shipping

In Stock.

 With this interface you can record and listen in 16 bits mono. All components through hole for easy repair. Case included.

 With this interface you can record in 8bits and listen in 12bits mono. Case* included.

The price is 17 Euro + Shipping.

In Stock. 

 With this interface you can record and listen in stereo with ST, STE, Mega ST, Mega STE, and TT. All components through hole for easy repair. (Box included)

The price is 28 Euro + Shipping.

In Stock. 

With this interface you can record and listen with ST, STE, Mega ST, Mega STE, and TT.

The price is 18 Euro + Shipping.

In Stock. 

Software Download
Schematic
Design Draw

With this interface you can Record in stereo with ST, STE, Mega ST, Mega STE, and TT.

The price is 10 Euro + Shipping.

In Stock. 

Software Download
Schematic
Design Draw 

With this box you can pickup 5V from Keyboard port using USB cable. The USB port as resetable fuse (100-250mA). 20cm cable and printed case included.

5 Euro + Shipping. 

In Stock.

Adapator for connect Falcon to VGA Monitor. Case* included.

The price is 15 Euro + Shipping.

In Stock.

*Colors may differ from photo (Blue, White or Black)

Adapator for connect Falcon to VGA & RGB (like SC1224) & Monochrome (SM124). Case included (Color only Grey).

The price is 20 Euro + Shipping.

In Stock.

14Mb Memory Board for Falcon (16Mb SIMM included), assembled and tested.

The price is 30 Euro + Shipping.

In Stock.

Low cost solution for replace the DMA cable.

The price is 9 Euro + Shipping.

In stock. 

The price is 6 Euro + Shipping.

 In Stock.

 Caps for DB 19

0,80 Euro + Shipping

On Stock.

Lithium 3.6V 2400mA battery for TT with connector and Velcro. Case* included.

Check the polarity before replace.

The price is 10 Euro + Shipping.

 In Stock. 

*Colors may differ from photo (Blue, White or Black)

The price is 2 Euro + Shipping.

 In Stock. 

The price is 4 Euro + Shipping.

In Stock.

 This interface replace the old serial (RS232) by USB connection (microUSB, cable not included), works perfecly with PSI2Win for transfer your files from or to PSION. The driver is standard FTDI works on Windows 7, 8.1 and 10. The sofware for Psion appears after plug on top slot (Last ROM Version 4.2). The new version as DC-DC converter for supply 9V during the transfert. You can use the box of your RS232 CommsLink for put the new hardware, it's the same size. 

The price is 22 Euro + Shipping.

Out of Stock

Psi2Win_beta3_build303.zip

Rampak Memory 256K for Psion Organiser II, battery included. (Case not included)

The price is 27 Euro + Shipping.

In Stock.

FlashPak Memory 512K for Psion Organiser II. (Case not included)

The price is 25 Euro + Shipping.

In Stock.

Replace the big transformer by any standard 5V USB power supply and microUSB cable.

The price is 7 Euro + Shipping.

Out of Stock.

AT/PS2 to XT Keyboard Converter for old PC, Case* included.
Original project clic here

The price is  8 Euro + Shipping.

In Stock.

Very Small Power Supply with input 5V and output 165V@20mA.
Only 3 Pin, In - Ground - Output. PCB size 18x16mm.

Schematic
Design Draw

The price is  6 Euro + Shipping.

In Stock.